Qualstar XLS-810160, Руководство по установке

Страница: 150 / 208

10.6 Defining Other Library Settings and Policies
10-36 501801 Rev. 07-01-19
10.6.3 Viewing and Editing SNMP Settings
This section describes how to view and edit the Simple Network Management Protocol
(SNMP) settings for the physical library. Data from the SNMP agents, contained in a
Management Information Base (MIB), helps in managing the network by showing
whether all devices are operating properly.
To view or edit SNMP settings for the physical library, follow these steps:
1. Access the Settings & Policies portlet as described in Section 10.6.1 on page
10-33 .
2. Select View/Edit SNMP Settings . The View/Edit SNMP Settings page opens,
as shown in Figure 10-35 .
3. Enter a name for the SNMP community in the Community Name field.
4. Press Save Changes to save the information.
10.6.4 Viewing and Editing Event Log Settings
This section describes how to view and edit the event log settings. The XLS uses these
settings to determine when to automatically delete entries in the event log.
Note: Refer to the XLS-810160/810240 Tape Libraries User’s Guide to learn how to
delete events manually.
Depending on the values specified, the library deletes events when:
• The number of events in the log exceeds the maximum number specified
Figure 10-35 View/Edit SNMP Settings page