Qualstar XLS-810160, Руководство по установке

Страница: 136 / 208

10.5 Entering Configuration Information
10-22 501801 Rev. 07-01-19
7. In the Carousels section of the page, make sure that the correct information is
displayed for an attached MEM.
8. If you changed the hardware configuration during installation or if the
information in the file is incorrect for any other reason, enter the correct
information.
9. If the hardware configuration is accurate, press Done .
10.5 Entering Configuration Information
After connecting the XLS to a network and logging in, you can enter basic configuration
information for the library, including the following:
•
Network address (see Section 10.5.2 on page 10-23 )
• Contact names and addresses (see Section 10.5.3 on page 10-25 )
•
Administrator name and address (see Section 10.5.4 on page 10-26 )
• Target IDs for the HBAs and the tape drives (see Section 10.5.5 on page 10-29 ).
10.5.1 Accessing the Configuration Portlet
To access the Configuration portlet, follow these steps:
1. If necessary, press the Home button in the upper right corner of any page to
return to the Home page.
Important: Section 10.2 on page 10-4 provides instructions for
obtaining the values for Theta and X.