quadient rena T-950, Руководство пользователя

Страница: 20 / 82

SETUP & OPERATION
20
1 3
2
Short Media
Side Guides
Mechanical Setup
Align the Feeder with the Tabber.
1. Feeder Distance .
For optimal media transition, the media
should just enter under the first roller [2]
of the Registration Assembly [1], as it
just leaves the exit rollers of the feeder.
To achieve this; if possible, position the
feeder so the distance between the exit
rollers on the feeder and the entrance
roller [2], located inside the Registration
Assembly [1] of the Tabber, are almost
equal to the length of the media, as shown below.
NOTE : You will not be able to achieve this optimal feeder distance adjustment when
using mail pieces shorter than 6.25” in length. In this case, position the exit end of the
feeder as close to the entrance end of the Tabber as possible.
When using the XPS-ProFeed Shuttle feeder this optimal feeder distance adjustment does
not apply. In this case, the XPS-ProFeed Shuttle feeder should be positioned so it is
almost touching the entrance end of the Tabber.
When using mail pieces that are shorter than 8”
in length; optional “Short Media Side Guides”
(Part#: EF-120 Inline Guide), for the EasyFeed
120 feeder, are available. These side guides will
allow the feeder to be positioned closer to the
Tabber, without the feeder side guides interfering
with the rotation of the Tabber’s take-up reel side
guide.