quadient rena T-950, Руководство пользователя

Страница: 29 / 82

SETUP & OPERATION
29
4. The Short Media Hold-down Guide [4]
can be placed where needed to hold the
media down as it passes under the
Tab/Label Applicator Head.
NOTE: The Registration Assembly [2]
can be set at an angle to increase the push
against the Media Guide Fence [3].
Make sure all of the registration rollers
on the Registration Assembly [2] are
riding on the same Transport Belt.
Tip: When running narrow, tri-folded or very light weight media the Media Guide nearest
the Media Guide Fence [3] can be removed and the Registration Assembly [2] can be set
at an angle to give more push to the media to hold it against the Media Guide Fence [3].
The Short Media Hold-down Guide [4] should then be positioned close to the Media
Guide Fence [3], as shown.
5. Adjust the Registration Assembly so that
the rollers push the media against the
Media Guide Fence and the media travels
straight along this guide. Turning the
Knob on this assembly counter-clockwise
will cause the adjustable rollers to push the
media against the Media Guide Fence
(operator side) and turning the adjustment
knob clockwise will cause the rollers to
exert less push on the media toward the
Media Guide Fence. When running the
media on the opposite side of the Tabber,
this adjustment is reversed.