76
2. Click the
System
icon; this will bring up the
System Settings
window.
3. Click on one of sound activity check boxes that you are going to work on; the
Browse
… button will
become active. Click the
Browse
… button; this will bring up the sound file open browser. Select your
favorite sound file for the activity and then click
Save
button to save it to the system.
4. Repeat step 3, if you desire to set up more sounds to other activities.
Note:
If the check box is unchecked, the sound will be muted for that activity.
5. To set up the remote mouse sensitivity, move the cursor onto the indicator on the
Mouse Sensitivity
Setting
level bar, and then click and hold the left mouse button to drag the level indicator to left or
right for decreasing or increasing the remote mouse sensitivity.
6. Click the
Save
button to save the system setting. Then click the
Close
button to close the setting.
Channel:
The
Channel
setup is used to read the channel number of the main receiver connected to the system and also
used to set a new channel number for the main receiver. The channel number has been preset when a main
receiver is delivered from the factory. Under rare circumstances, the channel number needs to be set to a
different number to avoid interference of other main receiver nearby. For QRF600 system, the change of main
receiver channel number will not affect the instructor and student keypad communication, because the keypad
can automatically allocate a main receiver.
To set up the main receiver channel, follow these steps:
1. Select
Settings
Tab window.
2. Click the
Channel
icon; this will bring up the
Set Channel
window.
3. If a main receiver is plugged into a USB port, the channel number of the receiver will be displayed on
the
Set Channel
text box. Click on the text box to enter the channel number you desire for the main
receiver. Then click on the
Send
button to send the change to the main receiver. The
valid channel number is from 0 to 49.
Hardware test:
The
Hardwar test
interface is used as hardware testing tool for the main receiver ,
instructor, and student keypad.
To use the hardware test tool, follow these steps:
1. Select
Settings
Tab window.
2. Click the
Hardware
icon; this will
bring up the
Hardware
test window.
