Speedkid
Speedkid
Subject to change without notice. – 12 | 2020 –
67
66
– 12 | 2020 – Subject to change without notice.
Utilisation
»
To move the clamp on the leaf spring sheets, loose the knurled screw in order.
»
Move the clamp with the knurled screw according to
the following instructions:
–
Move the clamp all the way to the front when
you carry a very light child and little luggage (soft
suspension).
–
Move the clamp backwards for two children and a
lot of luggage (harder suspension).
»
Tighten the knurled screw firmly and put the same
value on the other leaf spring.
Storage
For storage, simply fold the Speedkid together and store it in a protected and dry place without
direct sunlight. Pay attention also to the instructions in the chapter
„Installing the buggy wheel“
on page 53
.
Danger!
Hands or fingers can become trapped on moving parts while setting up and
folding up the cab. Carry out work carefully and keep children away from the
vehicle.
»
Stand behind the cabin and open the storage cover.
»
Pull the sliders on the folding system tubes all the way
up in order to release the hinges.
»
While holding the sliders in the higher position, press
with your hands from top on the folding system tubes
to open the hinges.
»
Then press the push handle all the way forward in
order to fold up the cabin.
Caution!
Only fold up the cabin after it has been cleaned both inside and outside and is
completely dry.
Care and maintenance
Caution!
For cleaning, use only water and domestic care agents such as detergents and textile
care products, soft cloths or impregnation and silicone spray. Do not use any sharp
edged tools or cleaning agents with a scouring effect. Cleaning agents containing
acids and solvents are also not permitted.
Caution!
Please note that textiles or fabric parts must always be completely dry in order to
avoid the formation of mould and mildew stains. Always use the right raincover
when driving in the rain or on snow.
To avoid bleaching of the fabric, we do not recommend exposing the trailer
to direct sunlight. When transporting the trailer in the vehicle, cover the trailer
because the glass of a vehicle can accelerate the bleaching of the fabric.
Regular care and maintenance of all parts and components helps prevent premature wear and
keeps the
Speedkid
ready for use at all times. This is particularly important when one of the
following influencing factors applies to your individual conditions of use:
»
Frequent use with high mileage
»
Regular use close to the maximum permitted total weight
»
A sporty riding style (sudden starting and braking, cornering at speed etc.)
»
Excessive weather influences such as UV radiation, temperature fluctuations, moisture,
contact with salt (road salt, sea water, salty air)
»
Unfavourable storing conditions (shortage of space, variations in temperature, sun light and
moisture)
Caution!
It is essential to adhere to the following care instructions and maintenance
intervals. Perform the tests stated in the checklists conscientiously and at the
specified times in order to use the Speedkid in a technically safe condition.
Replace damaged components immediately, see
„Spare parts“ on page 72
. If
necessary, contact our service department or your local specialist dealer, see
„Support information“ on page 75
.
Caution!
Despite the use of weather proof material, the corrosion cannot be completely
eliminated.
De-icing salts such as magnesium chloride can lead to stress corrosion
cracking on the components. In winter or in case of rain, it is also recommended
to clean the trailer after each ride with a dry cloth. In addition, a treatment
with cleansers and preservatives such as wax or spray oil every two weeks is
recommended.
Care
