22
»
Insert the wheel axle through the hub of the wheel.
»
Loosen the second nut of the jogger wheel axle. This will allow the
axle to be aligned.
»
Align the axle exactly in the center and then fix the axle again by
tightening the two nuts from left and right.
»
Check that the distance between the end of the axle and the adjusting
nut is the same on both sides and adjust if necessary.
To mount the jogger wheel you need a size 17 open-end wrench.
Mounting the jogger wheel
»
Place the jogger wheel together with the inserted wheel axle into the
socket located at the end of the fork rods.
»
Tighten the nuts using a size 17 open-end wrench.
»
Insert the quick release through the wheel axle and screw the lock
nut onto the thread.
»
Tighten the quick release so firmly that the lever can only be closed
with some force.
»
Check that the jogger wheel is running straight and, if necessary,
adjust it by loosening the quick release and aligning the seat of the
wheel axle in the socket of the fork rods.
»
Close the quick-release lever afterwards and check again the straight
running.
Danger!
Before each ride, check that the jogging wheel is securely
fastened, as the wheel could roll over if it becomes loose
during the ride.
»
Loosen the quick release axle of the jogger wheel and pull it
side ways out of the jogging wheel.
»
Stow the jogger wheel in the compartment room of your Qeridoo.
Stowing the jogger wheel
Danger!
Remove the buggy wheel when using the 14" jogger wheel.
ASSEMBLY
Содержание Kidgoo Pro
