QERIDOO Kidgoo Pro, Руководство пользователя

Страница: 17 / 44

17
Danger!
Make sure that the push handle is also mounted in trailer
mode at each time you drive as shown in the table (see
„Setting the mode“ on page 26 ). Only then is the cabin
equipped with an additional roll bar.
»
Put the cabin in the upright position and open the cover.
»
Check the tension of the 4 black belts under the seat and tighten them
firmly.
Tightening the backrest
The stable backrest is an important safety component. For a good
stability the belts under the seat and behind the back rest must always
be tightened firmly.
»
Open the cover of the compartment room and check the tension of
the 4 belts behind the backrest.
»
Tighten all belts in the rear compartment room.
Inserting the pennant
Danger!
The pennant must always be mounted in trailer mode.
Otherwise the very low Kidgoo is too easily overseen by
other road users.
For safety reasons, we recommend putting the pennant
into the pennant holder so that it is easily visible before
every journey, including in buggy or jogger mode.
»
Make sure that the Velcro straps on the sides of the interior which
connect the side seat cushions to the side wall.
ASSEMBLY