QERIDOO Kidgoo Pro, Руководство пользователя

Страница: 20 / 44

20
»
Tighten the connection to secure the rear wheel:
–
Quick-release axle: Use the supplied quick release adapter.
Tighten the cap nut until you can close the lever with a certain
amount of pressure.
–
Full axle: Tighten the nut with a spanner. Always pay attention
to the bicycle manufacturer’s notes about the tightening torque.
Tip!
The supplied universal coupling is suitable for mount-
ing on the majority of rear wheel designs. If it does
not fit your bicycle, find a suitable adapter and special
couplers in our coupling guide on the following website:
www.qeridoo.de/kupplungsleitfaden
Caution!
Due to the construction of the coupler, slight wear and
tear in the form of scratches can occur at the connection
between bicycle frame and coupler. This is not a reason
for a complaint.
Danger!
Do not use a washer or similar at the connection between
the bicycle frame and coupler because this could negatively
affect the stability of the connection.
»
Prepare the bicycle for mounting the coupler by undoing the screw
connection of the rear wheel axle:
–
Quick-release axle: Open the quick release lever and unscrew
the cap nut on the other side of the rear wheel axle.
–
Full axle: Unscrew the nut on the left side of the rear wheel axle.
»
Mount the coupler on the rear wheel axle:
–
Place the large hole of the coupler onto the left side of the rear
wheel axle so that the coupler is facing outwards.
–
Screw on the dedicated nut and tighten it slightly.
–
Align the rear wheel so that it can turn freely.
–
Align the coupler so that it faces horizontally to the rear.
Caution!
Do not use a tool which was previously in contact with
conventional steel. Smallest steel particles could be
transferred that could lead to contact corrosion.
ASSEMBLY