QERIDOO Kidgoo Pro, Руководство пользователя

Страница: 21 / 44

21
ASSEMBLY
In trailer mode, a certified rear light must be operated in accordance with
the specifications of the German Road Traffic Licensing Regulations
(StVZO) in poor visibility or twilight.
Installing the rear light
»
Move the push handle to the second last upper position above the roof.
»
Mount the rear light on the left side of the upwardly folded push handle.
Tip!
Pay attention to the information provided by the manufacturer
regarding the operation of the rear light.
Mounting the 14" jogger wheel
Inserting the fork rods
You only need the fork rods when using the 14" jogging wheel. The fork rods
are fixed with a locking pin in the tow bar mount.
Danger!
Only use the fork rods in conjunction with the provided jogger
wheel.
»
Press the front button on the right fork rod to unlock the locking bolt.
»
Keep the button pressed and push the fork rod from the front into
the tow bar mount. Be careful to push the fork rod into the tow bar
mount only so far that the locking bolt is located at the first opening
of the tow bar mount and the push button is still outside of the tow
bar mount.
»
Release the button so that the locking bolt secures the fork rod in
the tow bar mount.
»
Repeat the procedure for the left fork rod.
Inserting the impeller axle
»
Loosen the screw of the quick release and pull it out of the wheel
axle.
»
Remove the adjusting nut and spacer ring at one end of the wheel
axle.