QERIDOO Kidgoo Pro, Руководство пользователя

Страница: 15 / 44

15
Installing the side rods
»
Insert the rear end of the side bar through the opening in the lateral
folding mechanism.
»
Fix the front end of the side rod using the supplied black hexagon
socket screws.
»
Repeat the process on the other side.
»
Remove the black rubber caps from the ends of the thru-axles and
then dispose of them.
»
Lift the cabin a little bit or place the cabin on its roof in order to install
the wheel easier.
Inserting the wheels
»
Insert one wheel into the cabin’s axle retainer:
–
Hold the wheel so that you can press your thumb onto the
rubber cap on the outside of the wheel hub.
–
Press on the rubber cap and keep it pressed in order to open
the push-in axle fastening.
–
Insert the wheel’s push-in axle as far as it will go into the axle
retainer.
–
Release the rubber cap to secure the push-in axle.
»
Pull on the wheel to check that the wheel is locked in the axle
retainer.
»
Insert the second wheel in the same way.
»
Check whether there is sufficient air in the wheels (recommended
air pressure: 2.5 – 3 bar). If necessary, use an air pump for car
valves to top up with air.
Installing the wheel guard
The wheel guard on both sides of the cabin prevent the wheels from
getting stuck on pillars or similar obstacles. The leaf spring covers
serve as protection against bruises.
ASSEMBLY