QED AutoPump AP-2 Скачать руководство пользователя страница 106

Страница: 106 / 111

Clean Environment Equipment

AP-2 Manual

Page 98

It is understood and agreed that QED Environmental Systems shall in no

event be liable for incidental or consequential damages resulting from its

breach of any of the terms of this agreement, nor for special damages, nor

for improper selection of any product described or referred to for a particular

application. Liability under this warranty is limited to repair or replacement

F.O.B. QED’s factory, or its appointed agent’s shop, of any parts which

prove to be defective within the duration and conditions set forth herein, or

repayment of the purchase price at the option of QED, provided the products

have been returned in accordance with the duration and conditions set forth

herein.

Subassemblies and Other Equipment Manufactured by Others

The foregoing warranty does not apply to major subassemblies and other equipment,

accessories, and other parts manufactured by others, and such other parts,

accessories, and equipment are subject only to the warranties, if any, supplied by

their respective manufacturers. QED makes no warranty concerning products or

accessories not manufactured by QED. In the event of failure of any such

product or accessory, QED will give reasonable assistance to Buyer in obtaining

from the respective manufacturer whatever adjustment is reasonable in light of the

manufacturer’s own warranty.

Illustrations and Drawings

Reasonable Effort has been made to have all illustrations and drawings accurately

represent the product(s) as it actually was at the time of doing the illustrations and

drawings.

However, products may change to meet user requirements and therefore may not be

reflected in the literature. In addition, literature may be updated to reflect the most

recent equipment revision(s). Changes to either or both equipment and/or literature

can be made without notice.

Buyer’s Remedies

The buyer’s exclusive and sole remedy on account of or in respect to the furnishing

of defective material or workmanship shall be to secure replacement thereof as

aforesaid. QED shall not in any event be liable for the cost of any labor expended

on any such product or material or for any special, direct, indirect or consequential

damages to any one by reason of the fact that it shall have been deemed defective

or a breach of said warranty.

Changes without Notice

Prices and Specifications are subject to change without notice.

Содержание AutoPump AP-2
















































































































Результаты поиска

Содержание AutoPump AP-2

Отзывы:

Похожие инструкции для AutoPump AP-2

Бренды по названию

Популярные бренды

QED AutoPump AP-2, Руководство по эксплуатации

Результаты поиска

Содержание AutoPump AP-2

Отзывы:

Похожие инструкции для AutoPump AP-2

Бренды по названию

Популярные бренды