PXM Q-Ray Console 24, Руководство пользователя

Страница: 60 / 80

2. Select Settings View
3. Select My Modules
4. Tap to enable modules
Enabling Modules
Once a module has been purchased or subscribed to, the module be available the next time the console
connects to the internet. The next time you turn on your console, go to
Settings View (signed in as the
console owner), open the My Modules dialogue and press Check for Modules . You can then enable each
new module by pressing Disable , at a time that suits you. When the button is green and shows Enabled,
then the module is enabled.
This operation does not require much bandwith, so if you do not normally connect your console to the
internet, then quickly using a hotspot will only use a few kilobytes of your data.
Disabling and Removing Modules
59