Pulsar dBi-M, Инструкция по эксплуатации

Страница: 63 / 71

PULSAR MEASUREMENT
63
Configuration/Holding Registers (Parameters)
The first table presents the unit symbols and their corresponding
descriptions for the
Configuration Registers (Parameters). The second table
shows the addresses, descriptions, and units of the Configuration Registers.
These registers are read/write (see Chapter 5 for details of each parameter),
and can be accessed using the Function Codes 3, 6 and 16.
Example:
You wish to know the current value for Empty Level. Search for register
address 105 with Function 3 and the information will then be displayed.
UNIT DEFINITION
U_NO None
U_MU Measurement Unit
U_PC Percentage
U_VU Volumetric Unit
U_TP Degree C
U_MN Minutes
U_VEL m/sec
U_MV Millivolt
Application
32BIT
REGISTER
ADDRESS
2X 16BIT
REGISTER
ADDRESS
DESCRIPTION UNIT
100 2052-2053 Mode U_NO
101 2054-2055 Transducer U_NO
102 2056-2057 Material U_NO
104 2058-2059 Measurement Unit U_NO
105 2060-2061 Empty level U_MU
106 2062-2063 Span U_MU
107 2064-2065 Near blanking U_MU
108 2066-2067 Far blanking U_PC