dBi-M
INSTRUCTION MANUAL
20
Resetting Factory Defaults
If you need to restore parameters to their original factory settings, then
access parameter
P930
, which is the factory defaults parameter, change the
value to
1
and
ENTER
. Or access the
Transfer menu
option and select ‘
Set
Factory Default
’ and
all parameters, will be restored to the factory settings
(including the DATEM trace) and on completion.
Checking Information Specific to your dBi-M Intelligent Transducer
There are some parameters dedicated to each individual dBi-M Series
Intelligent Transducer, such as the firm
ware revision and the unit’s serial
number.
Checking the Firmware Revision and Serial Number
If you need to identify the serial number of the unit or the current level of
firmware in your dBi Series Intelligent Transducer, the following parameters
can be used. Select parameter
P926
to view the identity of the current
firmware revision
or
P928
for the
serial number
of the unit.
Содержание dBi-M
Страница 1: ...dBi M Instruction Manual...
Страница 2: ...2...
Страница 10: ...dBi M INSTRUCTION MANUAL 10 EU UK Certificate of Conformity...
