Pulsar dBi-M, Инструкция по эксплуатации

Страница: 29 / 71

PULSAR MEASUREMENT
29
Toggle Parameter List
When you have uploaded the parameters from the connected dBi-M (or
from your laptop), a list of changed parameters will appear in the right-hand
side of your screen.
Pressing the toggle parameters icon will alternately show all
parameters, (with the changed parameters highlighted in yellow), show only
the changed parameters and then hide the table from view.
Main Screen Selection Tabs
Echo
This provides a graph and controls for viewing echo traces.
Parameters
dBi-M parameters can be viewed in a table format, and in relational groups.
A single parameter can be viewed or all parameters from that group can be
changed. You can also view the individual parameters options, change
them, and default them to their factory values.
For further information on the parameters available in each section and their
options, please refer to
chapter 5 Parameter Guide .
Selecting this icon in the parameter group, will download the values of the
parameters for that section. The value boxes will then be highlighted in
green, signifying that the values have been downloaded correctly.
Selecting this icon next to a parameter, will download the values for the
parameter only. The value box is then highlighted in green, signifying that
the value has been downloaded correctly.
Selecting this icon next to a parameter, will enable you to view the options
available for that parameter. You can choose to select a different value for
the parameter or default it to its factory setting.