PT CPC5565, Руководство пользователя, Страница: 73 / 118

Serial Interface Subsystem
73
Debug/Verbosity Level
The SIPL provides commands to enable and disable output of error/diagnostic messages to the
serial debug interface at runtime:
• “Get Debug Level Command,” on page 73
• “Set Debug Level Command,” on page 73
Get Debug Level Command
To get the current debug level, the Get Debug Level command must be used. This command
has the following synopsis:
[B8 xx 03 0A 40 00]
The IPMC responds to the Get Debug Level command with the following reply:
[BC xx 03 00 0A 40 00 <debug level> ]
The
<debug level>
parameter contains the bit fields shown in Table 4-9, “IPMC Debug
Levels,” below.
Set Debug Level Command
To change the current debug level, the Set Debug Level command must be used. This
command has the following synopsis:
[B8 xx 04 0A 40 00 <debug level> ]
Table 4-9: IPMC Debug Levels
Bit Name Description
0 (LSB) Error Logging Enable If set to 1, the IPMC outputs error/diagnostic messages
onto the serial debug interface.
1 Low-level Error Logging Enable If set to 1, the IPMC outputs low-level error/diagnostic
messages onto the serial debug interface.
2 Alert Logging Enable If set to 1, the IPMC outputs important alert messages
onto the serial debug interface.
3 Payload Logging Enable If set to 1, the IPMC provides a trace of SIPL activity on
the payload interface onto the serial debug interface.
4 IPMB Dump Enable If set to 1, the IPMC provides a trace of IPMB messages
that are arriving to/going from the IPMC via IPMB.
5-7 NA Reserved