PT CPC5565, Руководство пользователя, Страница: 113 / 118

Product Safety Information
113
Product Safety Information
Safety Precautions
Review the following precautions to avoid injury and prevent damage to this product, or any
products to which it is connected. To avoid potential hazards, use the product only as specified.
Read all safety information provided in the component product user manuals and understand
the precautions associated with safety symbols, written warnings, and cautions before
accessing parts or locations within the unit. Save this document for future reference.
Caution:
Handling the CPC5565: It is important to hold the CPC5565 only by the front panel or PCB
edges. Avoid touching any components unless necessary to service the product. Do not
handle the heat sink, as this can adversely affect the thermal connection between the heat
sink and the processor, and cause the processor to overheat under normal operating
conditions.
Warning:
To avoid burns: The heat sink on the CPC5565 board can get very hot during normal
operation. To avoid burns, take extra care when removing the board from the chassis soon
after shutdown. Wait a few minutes to allow the heat sink to cool down.
Caution:
To Avoid Electric Overload: To avoid electrical hazards (heat, shock and/or fire hazard),
do not make connections to terminals outside the range specified for that terminal. See the
product user manual for correct connections.
Caution:
To Avoid the Risk of Electric Shock: When supplying power to the system, always make
connections to a grounded main. Always use a power cable with a grounded plug (third
grounding pin). Do not operate in wet, damp, or condensing conditions.
Caution:
System Airflow Requirements: Platform components such as processor boards, Ethernet
switches, etc., are designed to operate with external airflow. Components can be destroyed
if they are operated without external airflow. Chassis fans normally provide external airflow
when components are installed in compatible chassis. Filler panels must be installed over
unused chassis slots so that airflow requirements are met. Please refer to the product data
sheet for airflow requirements if you are installing components in custom chassis.
Caution:
Do Not Operate Without Covers: To avoid electric shock or fire hazard, do not operate this
product with any removed enclosure covers or panels.