PT CPC5565, Руководство пользователя, Страница: 52 / 118

Chapter 3: Getting Started
52
In order for Spanning Tree to function, BPDUs must pass between the CPSB-2.16 ports of
each CPC5565. Packets must be allowed to be switched between both eth0/eth1 interfaces
and both of the CPSB-2.16 ports. These requirements result in the need to place both CPU
Ethernet ports and both CPSB-2.16 ports into a common VLAN.
Console Redirection
Console redirection allows monitoring of the CPC5565's boot process and running the
CPC5565's BIOS setup utility from a remote serial terminal. Connection is made directly
through the front-panel console port. See
“CPC5565 Front Panel,” on page 19 , for the port
location.
The console redirection feature is most useful in cases where it is necessary to communicate
with the CPC5565 in an embedded application without video support.
Console redirection is configurable from the CPC5565's BIOS setup utility Remote Access
Configuration setup menu under the Advanced tab on the main menu. SW2-4 must also be
closed. See
“SW2-4: Console Redirection,” on page 38 .
The default CMOS settings within the Remote Access Configuration menu are as follows.
Note: Some operating systems may have problems with the redirection if BIOS POST is set to
Always. If there is a problem, try either the Disabled or Boot Loader options.
Older Operating Systems
For operating with older Operating Systems (such as Windows 2003 Server), in the BIOS Boot
Up Screen, select booting from Legacy IDE mode, not AHCI.
Remote Access: Enabled
Serial Port Number: COM1
Base Address, IRQ: 3F8h, 4
Serial Port Mode: 09600 8,n,1
Flow Control: None
Redirection After BIOS POST: Always
Terminal Type: VT100
VT-UTF8 Combo Key Support: Disabled
Sredir Memory Display Delay: No Delay