PT AMC123 Скачать руководство пользователя страница 94 | Manualshive

Страница: 94 / 104

background image

Chapter 7: Specifications

94

Absolute Maximum Ratings

Absolute maximum ratings are limits beyond which permanent damage to the module may
occur or module reliability may be affected. Stressing the AMC123 beyond the “absolute
maximum ratings” may cause permanent damage.

The values shown below are stress ratings only. Do not operate the AMC123 at these
maximums. See

“DC Operating Characteristics,” on page 94

, for operating conditions.

Supply Voltage, Vcc12 (+12 V):

10-14 V

Supply Voltage, Vcc3 (+3.3 V):

3.0-3.6 V

Storage (Non-operating) Temperature:

-40

°

C to +85

°

C (-40° F to 185° F)

Non-Condensing Relative Humidity:

<95% at 40

°

C (104° F)

Environmental Parameters

The operating temperature range is 0° C to 70° C (32º F to 158° F). The AMC123 comes from
the factory with an integrated heat sink for cooling the processor. The heat sink requires 300
LFM of airflow.

Caution:

External airflow must be provided at all times during operation to avoid damaging the CPU
module. PT strongly recommends use of a card rack fan tray to supply the external airflow.

Chapter 8, “Thermal Considerations,” on page 97

for more information about module

cooling mechanisms.

DC Operating Characteristics

Table 7-1, “Power Consumption with 1.2 GHz Processor,”

shows power consumption of an

AMC123 with a 1.2 GHz Intel EP80579 Integrated Processor with 2GB DDR2-800 SDRAM
installed.

Battery Backup Characteristics

The battery backup circuit on the AMC123 contains two ML621 manganese lithium batteries
that are charged during normal operation and are used only when power is not applied to the
module. The battery operates from -20°C to +60°C under normal operating conditions. Fully
charged batteries can keep the battery-backed portions of the AMC123 powered for >60 days.
For ensuring discharged batteries are restored to a fully charged state, ensure power is applied
for more than 30 hours.

Table 7-1:

Power Consumption with 1.2 GHz Processor

Voltage (VDC)

Maximum Power (W)

12 V, (10 - 14 V)

30 W

3.30 V, (3.0 - 3.6 V)

0.35 W

Total Power

30.35 W

«
...
92
93
94
95
96
...
»

Содержание AMC123









































































































Отзывы:

Нет отзывов

Похожие инструкции для AMC123

Бренд: JBL Страницы: 8

Бренд: Richie Kotzen Страницы: 12

Бренд: dB Страницы: 6

Бренд: Channel Master Страницы: 2

Бренд: McIntosh Страницы: 55

Бренд: Nobsound Страницы: 2

Бренд: Ltc Audio Страницы: 5

Бренд: icon Audio Страницы: 9

TrueWave TW1750

Бренд: Cal Power Страницы: 84

Бренд: PAC Страницы: 6

Бренд: K&K Sound Страницы: 2

Бренд: Denon Страницы: 13

Бренд: AVProConnect Страницы: 16

Бренд: Black Rooster Audio Страницы: 4

Guy Pratt INTERSTELLAR-600

Бренд: Ashdown Страницы: 27

Бренд: GLX Страницы: 2

Бренд: McIntosh Страницы: 28

Бренд: Cary Audio Design Страницы: 17

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды