PT AMC123 Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 104

background image

Chapter 2: Introduction

20

Product Definition

The AMC123 is a 32-bit AdvancedMC single-board compute module, featuring the 1.2 GHz
Intel EP80579 Integrated Processor, a complete system on-a-chip (SOC) processor designed
for high-performance embedded applications. The module utilizes a single 333.5 MHz PC2-
5300 64-bit SO-RDIMM with Error Correction Code (ECC), up to 4 GB is supported using
2 Gbit DRAM technology, and 2 GB using 1 Gbit DRAM technology. The AMC123 incorporates
a 16 GB USB flash storage module, or an optional 16 GB Serial ATA (SATA) flash storage
module on the SO-DIMM.

Ethernet connectivity is available through dual front panel RJ45 10/100/1000Base-T Ethernet
ports. The AMC123 also supports the PCI Industrial Computer Manufacturers Group (PICMG)

®

sub-specifications AMC.1 (x1, x4, or x8 PCI Express), AMC.2 (Gigabit Ethernet), and AMC.3
Type 1 (SATA II) to ensure a comprehensive set of interconnecting capabilities to the carrier
board. A standard USB 2.0 port and an RJ9 console port are also provided on the front panel.

The AMC123 is compliant with the PICMG AMC.0 specification and adheres to mechanical,
power, thermal, interconnect, and management functions defined in this specification.

AMC123 Features

The AMC123 includes the following features:

•

Single, mid-size PICMG AMC.0 processor module

•

PICMG AMC.0, R 2.0 compliant

•

IPMI v1.5 specification compliant

•

1.2 GHz Intel EP80579 Integrated Processor

– Intel architecture complex based on the Intel Pentium

®

M processor

– Integrated memory controller hub supporting:

•

Four-channel Enhanced Direct Memory Access (EDMA) controller

•

Single PCI Express interface up to x1, x4, or x8 supported on port A, or split into two x4
interfaces (x1 or x4)

•

Single Double-Data-Rate (DDR2), 64-bit wide + ECC, 800 MHz

•

Two System Management Bus (SMBus) interfaces (first dedicated as slave, second
configurable as master or slave)

•

Two integrated Universal Asynchronous Receiver/Transmitters (UARTs)

•

Two Universal Serial Bus (USB) 2.0 host controller ports (one dedicated to front-panel, one
routed to on-board devices and AMC card edge)

•

Two-stage watchdog timer

•

Real-time clock/CMOS RAM (with dual battery support)

– Integrated I/O controller hub

– Integrated I/O support with three Ethernet MACs, two Controller Area Network (CAN) interfaces

and a local expansion bus interface

– 256 KB of L2 cache

– 400/533 MHz internal Front Side Bus (FSB)

«
...
18
19
20
21
22
...
»

Содержание AMC123









































































































Отзывы:

Нет отзывов

Похожие инструкции для AMC123

Бренд: QUAD Страницы: 16

Бренд: Cambridge Audio Страницы: 16

PowerLight PL-3.4

Бренд: QSC Страницы: 2

Бренд: QSC Страницы: 2

Бренд: Xaoc Devices Страницы: 6

Бренд: Yamaha Страницы: 16

Бренд: Yamaha Страницы: 16

Бренд: Yamaha Страницы: 8

THR30II Wireless

Бренд: Yamaha Страницы: 2

Бренд: Yamaha Страницы: 150

Бренд: Yamaha Страницы: 16

Бренд: Yamaha Страницы: 4

Бренд: Galactron Страницы: 12

Бренд: QUAD Страницы: 16

Бренд: AR Страницы: 52

Chupacabra HRP Series

Бренд: Ceriatone Страницы: 17

Бренд: Denon Страницы: 35

Jazz Chorus JC-90

Бренд: Roland Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды