EDDYTHERM operating manual
9
Before setting up
Read the operating instructions carefully and familiarize yourself with the controls.
The equipment may only be operated and serviced by trained personnel.
The operating instructions are an integral part of EDDYTHERM and must be always be legible, complete
and available to anyone working with the device.
The device may only be used as intended and only if it is fully operational.
Disconnect the device from the power supply if damage is visible on the housing or power cord. In this
case, do not use the device.
Only start up the device in enclosed areas.
The device must be monitored at all times during operation. When the device is not used for lengthy
periods, disconnect it from the power supply.
Do not operate the device with the housing open or removed. Before opening the device, disconnect it
from the power supply.
The components being heated must be free of scale and burrs.
Magnetic field
The operation of induction heaters is always accompanied by strong magnetic fields. This must be taken into
consideration when working with the equipment. For example, wrist watches or heart pacemakers may be
influenced by the magnetic field. The device may only be used by operators without heart pacemakers or
similar implants that are sensitive to electromagnetic fields.
Do not wear metal rings on your fingers.
In order to comply with the exposure limits according to Directive 2004/40/EC, machine operating personnel
must maintain a minimum distance of 1 m in all directions as soon as the heating process begins.
Loading/unloading
Only load and unload workpieces while wearing heat-resistant work gloves.
Use suitable transport equipment and installation tools.
Wear protective clothing when loading/unloading the equipment.
Only load and unload heavy workpieces using suitable lifting gear.
Heavy workpieces may be placed on the crossbar swivel only when its locked in position.
Cleaning/maintenance
The device must be checked regularly for safe operation according to the statutory regulations of the
country in which it is used.
Repairs on the EDDYTHERM system may only be performed by factory authorized technicians.
Improper repair can lead to a significant danger to the user.
Only use original spare parts and original accessories.
The manufacturer shall not assume liability if modifications are made on the system that were not first
agreed on by the manufacturer.
Clean the device with suitable cleaning agents only (e.g., WD40 is recommended).
Grease the columns and crossbars regularly, but ensure contact surfaces between columns and crossbar
are free of grease and dirt.
Disposal
The device must be disposed of properly and in accordance with statutory regulations (Electrical and
Electronic Equipment Act).
Before setting up
Read the operating instructions carefully and familiarize yourself with the controls.
The equipment may only be operated and serviced by trained personnel.
The operating instructions are an integral part of EDDYTHERM and must be always be legible, complete
and available to anyone working with the device.
The device may only be used as intended and only if it is fully operational.
Disconnect the device from the power supply if damage is visible on the housing or power cord. In this
case, do not use the device.
Only start up the device in enclosed areas.
The device must be monitored at all times during operation. When the device is not used for lengthy
periods, disconnect it from the power supply.
Do not operate the device with the housing open or removed. Before opening the device, disconnect it
from the power supply.
The components being heated must be free of scale and burrs.
Magnetic field
The operation of induction heaters is always accompanied by strong magnetic fields. This must be taken into
consideration when working with the equipment. For example, wrist watches or heart pacemakers may be
influenced by the magnetic field. The device may only be used by operators without heart pacemakers or
similar implants that are sensitive to electromagnetic fields.
Do not wear metal rings on your fingers.
In order to comply with the exposure limits according to Directive 2004/40/EC, machine operating personnel
must maintain a minimum distance of 1 m in all directions as soon as the heating process begins.
Loading/unloading
Only load and unload workpieces while wearing heat-resistant work gloves.
Use suitable transport equipment and installation tools.
Wear protective clothing when loading/unloading the equipment.
Only load and unload heavy workpieces using suitable lifting gear.
Heavy workpieces may be placed on the crossbar swivel only when its locked in position.
Cleaning/maintenance
The device must be checked regularly for safe operation according to the statutory regulations of the
country in which it is used.
Repairs on the EDDYTHERM system may only be performed by factory authorized technicians.
Improper repair can lead to a significant danger to the user.
Only use original spare parts and original accessories.
The manufacturer shall not assume liability if modifications are made on the system that were not first
agreed on by the manufacturer.
Clean the device with suitable cleaning agents only (e.g., WD40 is recommended).
Grease the columns and crossbars regularly, but ensure contact surfaces between columns and crossbar
are free of grease and dirt.
Disposal
The device must be disposed of properly and in accordance with statutory regulations (Electrical and
Electronic Equipment Act).
