Proximus Forum 5000 Скачать руководство пользователя страница 38

Страница: 38 / 154

Forum Phone 515/525/535 System Telephones

Using a Headset

You are telephoning
over the headset and
want to let a second
person listen in on the
call.

Pick up the handset.

The second person
listens in on the call
over the handset (LED
of the key

is illumi-

nated).

End listening-in:

Replace the handset

(LED of the key

illuminated).

Press the hands-

free/open-listening
key.

Open-listening is
switched on, persons
present can listen in on
the call (LED of the
key

flashes).

End open-listening:

Press the hands-

free/open-listening key
(LED of the key

off).

You are telephoning
over the headset, a
second person listens in
on the call over the
handset. You want to
switch of the headset.

Press the headset

key (

long

key press).

The headset is switched
off (LED of the key

is off).

Situation:

Operation:

Result:

Содержание Forum 5000



























































































































































Результаты поиска

Содержание Forum 5000

Отзывы:

Proximus Forum 5000, Руководство пользователя, Страница: 38 / 154

Результаты поиска

Содержание Forum 5000

Отзывы: