Proximus 5025 Скачать руководство пользователя страница 19

Страница: 19 / 216

Connecting a Handset or Headset

Installing the Telephone

Jacks on the back of the phone (Forum IPhone 5025 / Forum IPhone 5030)

Jacks on the back of the phone (Forum IPhone 5040)

Headset (optional)

The SIP system telephones offer the possibility to connect a headset
(Exception: Forum IPhone 5010).

Please note:

The headset port is for headset use only. Plugging any other
devices into this port may cause damage to the phone and will
void your warranty.

Forum IPhone 5020/5025/5030

Turn the phone over and locate the headset jack marked with the

symbol. If

you have a headset with an RJ9/RJ22 4-pin connector, insert the headset
cord into the jack until it clicks into place (see illustrations

Jacks on the back of

the phone (Forum IPhone 5020)

on page 16 and

Jacks on the back of the

phone (Forum IPhone 5025 / Forum IPhone 5030)

on page 17). Then route

the headset cord through the groove.

If you have a DHSG/EHS headset with an RJ45 6-pin or 8-pin connector,
remove the plastic headset jack adapter and then insert the cord into the jack

Содержание 5025

























































































































































































































Результаты поиска

Содержание 5025

Отзывы:

Proximus 5025, Руководство пользователя, Страница: 19 / 216

Результаты поиска

Содержание 5025

Отзывы: