Windows IAS RADIUS Server Configuration
Tsunami MP-8100 Reference Manual
88
10. At this point, you must add Vendor Specific values. Click
Add
to enter Proxim’s vendor code values. The RADIUS
Attributes window is displayed.
a. Select Vendor Specific RADIUS Standard. The Multivalued Attribute Information window is displayed.
b. Click
Add
to get Vendor Specific Attribute Information.
c.
Select the
Specify Network Access Server Vendor
radio button and enter
841
for Proxim code.
d. Click
Yes
. It conforms the radio button under Specify whether the attribute conforms to RADIUS RFC
specification for vendor specific Attributes area.
e. Click
Configure Attribute
to display the Configure USA (RFC Compliant) values window.
f.
In the Vendor Assigned Attribute number area, select either (1) for Input/Uplink or (2) for Output/Downlink.
g. For Attribute Format, select
Decimal
.
h. For Attribute value, select the Kbps value being tested, for example 64 for 64Kbps.
i.
Click
OK
to save configuration.
j.
Click
Apply
to RADIUS Attributes configuration.
k. Click
OK
. The following window is displayed:
Your configuration should be complete.
5.1 Addition of Units to a Routed Network
The following describes how additional units can be added to a routed network:
1. Log into the BSU by placing its IP address into a Web browser address field.
2. When the Web interface is displayed, click the
Web Config
button.