manualshive.com logo in svg

Proxim Tsunami MP-8100 Series, Справочное руководство, Страница: 12 / 99

Поделиться
Скачать
Proxim Tsunami MP-8100 Series Скачать руководство пользователя страница 12

Command Line Interface

Tsunami MP-8100 Reference Manual                                                                                                                                                                                        

12

To list the commands in the Privileged mode, enter 

?

. This lists the following:

1.4.3 Global Configuration Mode

In this mode, you can configure your device. Use the ‘configure’ command to enter this mode.

Example:

System Name# configure

System Name(config)#

This brings the CLI into a special mode called “Global Configuration Mode”, where full access permissions are given to the
user for configuring any available configuration of the device through CLI. The command prompt of this mode uses an
interactive hierarchical format which shows the configuration level the user is in and with its name.

 1.5 Configuring the Device using CLI Commands

The Command Line Interface (CLI) is divided into different command modes. Each command mode has its own set of 
commands that manage the network operations. The commands that you use also depend on the mode that you are in.

1.5.1 Commit

To apply the changes done, you have to commit those changes before exiting from the configure mode. To do this, use the 
following commands before doing an exit from configure mode. Value for commit must be set to 1.

System Name#?

Possible completions:

aad                 Antenna Alignment Display

clear               Clear the Statistics

configure           Enter Global Configuration Mode

disable             Turn off privileged commands

enable              Turn on privileged commands

exit                Exit from EXEC

ping                Send Echo Messages

show                Show Running System Information

traceroute          Trace Route to Destination 

System Name> enable
System Name# configure
System Name(config)#commit  ?
% Input Range <value(1)> required
System Name(config)# commit 1

Содержание Tsunami MP-8100 Series




































































































Отзывы:

Нет отзывов