manualshive.com logo in svg

Proxim Tsunami MP-8100 Series, Справочное руководство, Страница: 73 / 99

Поделиться
Скачать
Proxim Tsunami MP-8100 Series Скачать руководство пользователя страница 73

Tsunami MP-8100 Reference Manual 

73

3

Event Log Error Messages

 3.1 DHCP

 3.2 Flash Module

Error Type

Message

Description

Corrective Action

NOTICE

DHCP Server Running

Information that DHCP server is 
running.

NONE

EMERGENCY

DHCP relay start failed

Unable to start DHCP relay.

Reboot the device

NOTICE

DHCP Relay Running

Information that DHCP Relay is 
running.

NONE

EMERGENCY

We couldn't store the DHCP 
MODE in flash

DHCP mode-related changes are 
not saved.

Reboot the device

NOTICE

DHCP Server Running with 
updated configuration

Changes made to DHCP server 
are applied.

NONE

NOTICE

DHCP Server Disabled

DHCP Server is disabled as per 
the configuration made.

NONE

NOTICE

DHCP Relay Disabled

DHCP Relay is disabled as per 
the configuration made.

NONE

Error Type

Message

Description

Corrective Action

ERROR

flashctrl module not yet 
initialized

Flash operations could not be 
performed as module has not 
been initialized yet.

Reboot the device and try 
again

ERROR

Failed to allocate memory for 
the flashctrl module

Flash operations could not be 
performed as memory could not 
be allocated.

Reboot the device and try 
again

ERROR

Failed to write configuration to 
file flashcfg.cfg

Could not save configuration to 
flash.

Reboot the device and try 
again

Содержание Tsunami MP-8100 Series




































































































Отзывы:

Нет отзывов