manualshive.com logo in svg

Proxim Tsunami MP-8100 Series, Справочное руководство, Страница: 28 / 99

Поделиться
Скачать
Proxim Tsunami MP-8100 Series Скачать руководство пользователя страница 28

Command Line Interface

Tsunami MP-8100 Reference Manual                                                                                                                                                                                        

28

NOTE: 

Maximum satellite units for MP-8100 is as per license.

System Name(config)# wireless
System Name(config-wireless)# worp
System Name(config-wireless-worp)# radio 1  bandwidth-limit-type policing
System Name(config-wireless-worp)# radio 1  input-bandwidth-limit 307200
System Name(config-wireless-worp)# radio 1  mac-acl disable
System Name(config-wireless-worp)# radio 1  max-sus 1
System Name(config-wireless-worp)# radio 1  worp-mtu 3836
System Name(config-wireless-worp)# radio 1  multi-frame-burst enable
System Name(config-wireless-worp)# radio 1  network-name OR_WORP
System Name(config-wireless-worp)# radio 1  output-bandwidth-limit 307200
System Name(config-wireless-worp)# radio 1  radius-mac-acl disable
System Name(config-wireless-worp)# radio 1  radius-profile-index one
System Name(config-wireless-worp)# radio 1  registration-timeout 10
System Name(config-wireless-worp)# radio 1  retry-count 3
System Name(config-wireless-worp)# radio 1  security-profile-index worpsecurity
System Name(config-wireless-worp)# radio 1  sleep-mode disable
System Name(config-wireless-worp)# radio 1  super-frame enable
System Name(config-wireless-worp)# radio 1  tx-rate 98
System Name(config-wireless-worp)#exit
System Name(config-wireless)#exit
System Name(config)#exit
System Name# show wireless worp
   // WORP CONFIGURATION //
 Mode                             : base
 Network Name                     : OR_WORP
 Max SUs                          : 1 
 Worp MTU                         : 3836 Bytes
 Super Packeting Status           : enable
 Multi Frame Burst                : enable
 Registration Timeout             : 10 Seconds
 Retry Count                      : 3
 Tx Rate                          : 98
 Input Bandwidth Limit            : 307200 Kbps
 Output Bandwidth Limit           : 307200 Kbps
Bandwidth Limit Type              : policing
 Security Profile index           : worpsecurity
 Radius Profile index             : one
 MAC ACL Status                   : disable
 Radius MAC ACL Status            : disable
 Radio MAC Address                : 00:21:86:51:e4:f4
 Supported Tx Rates               : 24-13.5Mbps,34-27Mbps,  42-40.5Mbps, 47-54Mbps, 
55-81Mbps, 63-108Mbps,68-121.5Mbps,70-135Mbps,79-162Mbps,89-216Mbps,96-243Mbps,98-270Mbps

Содержание Tsunami MP-8100 Series




































































































Отзывы:

Нет отзывов