Command Line Interface
Tsunami MP-8100 Reference Manual
14
By typing question mark with the
show
command in the privileged mode, you can get the show command structure and you
can see the command’s description.
1.5.4 Device Configuration
To configure the device parameters in Global Configuration mode, type
?
to list the available commands.
To proceed with configuration, select each interface and enter the required parameters and their configurations.
System Name# show ?
Possible completions:
access-ctrl Access Control,Table Configuration
dhcp DHCP Configuration
ethernet Ethernet Configuration
eventlog Eventlog Configuration
filtering Filtering Configuration
hostname Display the Host Name Information
http Http Configuration
inventory Display the Security ID,Inventory Component Table
ip Display Ethernet Ip/Wireless Ip/Default Gateway Information
kernel-route-tbl Display the Kernel Route Table Information
licensed-feature Display the license feature Information
macacl Mac Acl Configuration
monitor-usage Displaying the CPU,RAM Usage
network Network Configuration
qos QoS Configuration
running-config Display All the Running Configuration
security Security Configuration
snmp Display SNMP V3/SNMP read,read write Password Information
sntp Sntp Configuration
ssh SSH Configuration
statistics Statistics Monitoring
syslog Display the Syslog,Hosttable Configuration
system-information Display the System Information
system-type Display the System Type table,Country Code,Forward Mode
tech-support Display Technical Support Information
telnet Telnet Configuration
templog Display the Temperature Log Table Configuration
tftp Tftp Configuration
traphost Display the Trap Host table information
vlan Vlan,SU Vlan Ethernet Configuration
vlan-trunk Vlan Trunk Table Configuration
wireless Wireless Status and Configuration
worp-qos Display the Worp Qos Configuration
System Name>enable
System Name #configure
System Name(config)#?
Possible completions:
commit Apply the changed configurations to the device
dhcp DHCP Configuration
ethernet Ethernet Configuration
exit Exit from configure mode
filtering Filtering Configuration
macacl Macacl Configuration
management Management Configuration
monitor Monitor Configuration
network Network Configuration
qos Quality of Service Configuration
radio-mode Radio Mode Configuration
radius Radius Configuration
reboot Reboot the device.Set 1 to reboot
security Security Configuration
system-configure Country Code,Packet Mode Configuration
vlan Vlan Configuration
wireless Wireless Configuration
worp-qos Worp Qos Configuration