manualshive.com logo in svg

Proxim Tsunami MP-8100 Series, Справочное руководство, Страница: 35 / 99

Поделиться
Скачать
Proxim Tsunami MP-8100 Series Скачать руководство пользователя страница 35

Command Line Interface

Tsunami MP-8100 Reference Manual                                                                                                                                                                                        

35

•

Deny IPX LSP

•

Deny IP Broadcasts

•

Deny IP Multicasts

The device can filter these protocols in the wireless interface to?Ethernet direction, the Ethernet?to?wireless direction, or in 
both directions. You can configure the following advanced filtering options:

Worp Intracell 

The following commands are used to “enable” WORP Intracell Configuration and it is configurable only in BSU with bridge 
mode.

Group Table 

The following commands are used to “enable” group table configuration and it is configurable only in BSU with bridge 
mode.

System Name (config-filter)#advanced
System Name(config-filter-advanced)# rowedit 1 direction ethernet2wireless
System Name(config-filter-advanced)# rowedit 1 protocol-name Deny IPX RIP
System Name(config-filter-advanced)# rowedit 1 entry-status enable
System Name(config-filter-advanced)#exit
System Name(config-filter)#exit
System Name(config)#exit
System Name# show filtering advanced
   // ADVANCED FILTER TABLE CONFIGURATION 
INDEX 1 
 
 Protocol Name  : Deny IPX RIP 
 Direction      : ethernet2wireless 
 Entry Status   : enable 

INDEX 2
 Protocol Name  : Deny IPX SAP
 Direction      : both
 Entry Status   : disable

INDEX 3
 Protocol Name  : Deny IPX LSP
 Direction      : both
 Entry Status   : disable

INDEX 4
 Protocol Name  : Deny IP Broadcasts
 Direction      : both
 Entry Status   : disable
INDEX 5
 Protocol Name  : Deny IP Multicasts
 Direction      : both
 Entry Status   : disable

System Name (config-filter)#worp-intracell
System Name(config-filter-intracell)# intracell-status enable
System Name(config-filter-intracell)#exit
System Name(config-filter)#exit
System Name(config)#exit
System Name(config)#exit
System Name# show filtering worp-intracell intracell-status
Intra cell status : enable

Содержание Tsunami MP-8100 Series




































































































Отзывы:

Нет отзывов