manualshive.com logo in svg

Proxim Tsunami MP-8100 Series, Справочное руководство, Страница: 22 / 99

Поделиться
Скачать
Proxim Tsunami MP-8100 Series Скачать руководство пользователя страница 22

Command Line Interface

Tsunami MP-8100 Reference Manual                                                                                                                                                                                        

22

•

Routing Mode. 

1.5.4.2 DHCP

When DHCP Server status is enabled, the DHCP server allocates IP addresses to hosts on the Ethernet side of the BSU or SU. 
After adding entries, you must commit and reboot the device for the values take effect.

NOTE: 

To enable DHCP Server on the device, at least one interface must be enabled in the DHCP Interface Table. To 

enable DHCP Server on an interface, at least one pool must be configured for it.

System Name(config)# system-configure
System Name(config-sysconfig)# ?

Possible completions:

country-code                          Country Code Configuration 
Exits Back to Global Configure Mode
frequency-domain                      Configure the Frequency Domain
network-mode                          Network mode of the Device
System Name(config-sysconfig)# country-code AT
Country Code is configurable only in AP mode.
Error in configuration parameters, Please verify Your Configuration
System Name(config-sysconfig)# network-mode bridge
Changes in Network Mode requires Commit and Reboot.
System Name(config-sysconfig)# frequency-domain ?
Possible completions:
<unitedstatesall(1),unitedstatesadhoc(2),unitedstates2p4(3),worldall(4),world4p9ghz(5),wor
ld2p4ghz(6),world2p3ghz(7),world2p5ghz(8),canada5ghz(9),europe5p8ghz(10),europe5p4ghz(11),
europe2p4ghz(12),russia5ghz(13),taiwan5ghz(14),unitedstates5ghz(15), canada5p8ghz(16)>      
configure the Frequency Domain
System Name(config-sysconfig)# frequency-domain 14
Changes In Frequency Domain Requires Reboot.
System Name(config-sysconfig)#exit
System Name(config)#exit
System Name#exit

System Name# show system-type
   // SYSTEM COUNTRY CODE,PACKET FORWARD MODE CONFIGURATION  //
Forwarding Mode            : bridge
Active Network Mode        : bridge

   // SYSTEM TYPE CONFIGURATION  //

RADIO-INDEX 1

 Radio Mode                          : EndPointA
 Active Mode                         : EndPointA
 Supported Radio Modes               : EndPointA<4>,EndPointB<5>
 Supported Frequency Domains         : 4,9,10,11,13,14,15,6,7,8,12,5
 Frequency Domain                    : taiwan5ghz
 Active Frequency Domain             : taiwan5ghz

Содержание Tsunami MP-8100 Series




































































































Отзывы:

Нет отзывов