Proxim Tsunami MP-8100 Series Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 99

Proxim Tsunami MP-8100 Series Скачать руководство пользователя страница 54

Command Line Interface

Tsunami MP-8100 Reference Manual

54

1.5.5.7 System Information

Enter the following commands to configure the System Information entries.

NOTE:

Setting factory-reset to yes or 1 will automatically reboot the device and the device will come up with default

values.

1.5.5.8 TFTP

You can transfer a file to or from the device using TFTP. Make sure that the TFTP server is running and configured to point to
the directory containing the file.

System Name # configure
System Name(config)#management
System Name(config-mgmt)# system-information
System Name(config-mgmt-sys-sysinfo)# ?

Possible completions:
commit        Commit Configuration
email       System Email Configuration
exit        Exits Back to Global Configure Mode
factory-reset     Factory Reset Configuration
gps-altitude     GPS Altitude Configuration
gps-latitude     GPS Latitude Configuration
gps-longitude     GPS Longitude Configuration
location        Location Configuration
phone-number     Phone Number Configuration
reboot        Reboot Configuration
restore       System Restore Configuration
system-name    System Name Configuration

System Name(config-mgmt-sysinfo)# email [email protected]
System Name(config-mgmt-sysinfo)# system-name System name
System Name(config-mgmt-sysinfo)# phone-number 1234567890
System Name(config-mgmt-sysinfo)# location systemlocation
System Name(config-mgmt-sysinfo)# gps-altitude 120
System Name(config-mgmt-sysinfo)# gps-latitude 37.3321
System Name(config-mgmt-sysinfo)# gps-longitude -121.8893
System Name(config-mgmt-sysinfo)# factory-reset no
System Name(config-mgmt-sysinfo)#exit
System Name(config-mgmt-sysinfo)# exit
System Name(config-mgmt)# exit
System Name(config)# exit
System Name#
System Name# show system-information

// SYSTEM INFORMATION CONFIGURATION //

Description     : System Description
Uptime       : 0-02:10:17.15
System Name     : System Name
Contact Mail     : [email protected]
Phone Number     : 1234567890
Location Name    : systemlocation
Gps Longitude    : -121.8893
Gps Latitude     : 37.3321
Gps Altitude    : 120
Product Description : Monaco-v1.0.0

«
...
52
53
54
55
56
...
»

Содержание Tsunami MP-8100 Series




































































































Отзывы:

Нет отзывов