90
File Sharing
During installation, the Symphony Composer Installation Wizard generates a
list of available drives which the computer may share with the network. The
list of drives includes not only hard drives, but also any floppy disk drives,
CD-ROM drives, and Iomega Zip drives that the Composer finds on the
computer.
The Symphony Composer Installation Wizard then prompts you to place a
check mark next to each drive you want to share with the network and select
an access level (Read/Write or Read Only).
After the Symphony Composer Installation Wizard completes the configura-
tion of the Symphony software, the drives you specified will be available to
other users on the network.
At any time, you may change which drives are shared from within the
Symphony Maestro Configuration Tool by clicking the <Configure> button
below the Symphony Network Status heading and choosing the File Sharing
tab.
The Symphony Maestro Configuration Tool also allows you to select
specific directories for sharing so that you do not need to provide remote
users with access to an entire drive. Therefore, you can limit the amount of
information that is available over the network.
If you only want to provide access to a specific set of files contained in the
same directory, then you can choose to share only that directory. In the
example below, only the folder labeled “DOS” on the C: drive is shared with
the rest of the network.
