119
9.
Click <OK> when notified that the upgrade process is complete, as
shown below.
10.
Click <OK> to close the Cordless Gateway Configuration screen.
11.
Click <Configure> under the Symphony-HRF Cordless Gateway
Network heading of the Maestro Configuration Tool..
12.
Click the Upgrade tab again to view the current firmware version in
use.
13.
Confirm that the update was successful. If an update occurred, then
the version number should have increased from what was reported in
Step #6.
Method 2: Upgrade from Disk
1.
Confirm that no cordless computer is using the Symphony-HRF
Cordless Gateway to access the Internet or communicate with an
Ethernet network while attempting an upgrade.
2.
Open the Symphony Maestro Configuration Tool on one of the
cordless computers.
3.
Click the <Configure> button under the Symphony-HRF Cordless
Gateway Network heading.
4.
Click the Upgrade tab in the Cordless Gateway Configuration screen,
as shown in the following example.
