20
G
You should try to place the Cordless Gateway on a flat, sturdy
surface as far from the ground as possible, such as on top of a desk
or bookcase, keeping clear of metal obstructions and away from
direct sunlight.
G
You should try to centrally locate the Cordless Gateway so that it
will provide coverage to all of the computers on the cordless
network.
G
The distance between the Cordless Gateway and a wall outlet
cannot exceed the length of the power adapter’s cable.
2.
Attach one end of the 10Base-T Ethernet cable, provided in the
product package, to the 10Base-T port labeled I on the back of the
Cordless Gateway and attach the other end to the 10Base-T port of an
Ethernet device.
Note:
Make sure that the Ethernet device is powered on before pro-
ceeding.
3.
Attach one end of the supplied AC power adapter to the back of the
Cordless Gateway and the other end to the wall outlet.
Note:
Use the Symphony-HRF Cordless Gateway only with the power
adapter supplied by Proxim with the product. Using another
power supply may damage the Symphony-HRF Cordless Gate-
way.
The three LEDs on the top of the Cordless Gateway will momentarily light
up. Also, the Power Indicator LED may turn off momentarily while the
Cordless Gateway searches for a cordless network to join. The unit is
operational when the Power Indicator LED is the only LED on the top of the
unit that is lit up.
In addition, the Cordless Gateway’s green Link LED, located to the left of the
10Base-T connectors, should light up.
4.
If the Link LED is on, proceed to Step #10. If the Link LED is not on,
proceed to Step #5.
