30
4.
Follow the installation instructions contained in this chapter. When
the instructions call for either the Windows CD or the Symphony
Installation CD, direct the installation wizard to search the temporary
folders you created in Steps #2 and 3 above.
5.
When the installation is complete, remove the temporary folders you
created in Steps #2 and 3 above from the computer’s hard drive.
Installation Procedure
Refer to the section below that corresponds to your computer’s operating
system. Then, refer to the section entitled “Symphony Software Installation
Steps” for additional installation assistance.
Windows 98 & Windows ME Installation Steps
Follow these steps to install the Symphony software on a Windows 98 or
Windows ME computer:
1.
Install the Symphony-HRF adapter as described in Chapter 3.
2.
Turn on the computer.
When the Symphony-HRF adapter is inserted for the first time, the Windows
operating system will automatically detect the card as a new device and run
the Add New Hardware Wizard.
Windows will recognize the Symphony-HRF USB Adapter as a HomeRF
Adapter and the Symphony-HRF PC Card as a HomeRF-LAN PC CARD.
3.
Insert the Symphony Installation CD into the computer’s CD-ROM
drive.
4.
For Windows 98 computers, click <Next> to continue.
5.
When prompted, select Automatic search for a better driver
(Windows ME) or Search for the best driver for your device
(Windows 98), and click <Next>.
6.
For Windows 98 computers, check the box labeled CD-ROM drive,
and click <Next> to continue.
