112
For a profile that does not communicate with either a Symphony or
RangeLAN2/OpenAir network (such as a profile that uses a wired
Ethernet card), then none of these entries should have a check mark;
this will prevent these programs from loading automatically when not
needed.
4.
After you have made changes to a profile’s network settings, click the
<Save Changes> button. To exit the Edit Profile screen without making
any changes, click the X box in the upper right hand corner of the screen.
5.
Restart the computer when prompted for these changes to take effect.
Creating and Deleting Profiles
Within the Location Switcher configuration screen, you may create a new
profile or delete an existing one.
To create a new profile, follow these steps:
1.
Click <Create Profile>. This will make a copy of an existing profile.
2.
Assign the duplicate profile a new name, as shown below.
3.
Change the network settings of the new profile using the Edit Profile
options discussed earlier this chapter.
Note:
There is no limit to the number of profiles that you can create.
