RY/TP7231RY/TP723F "
522Odru"Yktgnguu"P"Tqwvgt"
- 90 -
40" Jqy"fq"K"eqphkiwtg"vjg"Tqwvgt"vq"ceeguu"Kpvgtpgv"d{"Gvjgtpgv"wugtuA"
1) Log in to the Router, click the “
Pgvyqtm
” menu on the left of your browser, and click
"
YCP
" submenu. On the
YCP
page, select “Dynamic IP” for "WAN Connection Type",
finish by clicking
Ucxg
.
2) Some ISPs require that you register the MAC Address of your adapter, which is
connected to your cable/DSL Modem during installation. If your ISP requires MAC
register, log in to the Router and click the "
Pgvyqtm
" menu link on the left of your browser,
and then click "
OCE"Enqpg
" submenu link. On the "
OCE"Enqpg
" page, if your PC’s MAC
address is proper MAC address, click the
Enqpg"OCE" Cfftguu
button and your PC’s
MAC address will fill in the "WAN MAC Address" field. Or else, type the MAC Address
into the "WAN MAC Address" field. The format for the MAC Address is
XX-XX-XX-XX-XX-XX. Then click the
Ucxg
button. It will take effect after rebooting.
Figure A-3 MAC Clone
50" K"ycpv"vq"wug"PgvOggvkpi."yjcv"fq"K"pggf"vq"fqA"
1) If you start NetMeeting as a sponsor, you don’t need to do anything with the Router.
2) If you start as a response, you need to configure Virtual Server or DMZ Host and make
sure the H323 ALG is enabled.
3) How to configure Virtual Server: Log in to the Router, click the “
Hqtyctfkpi
” menu on
the left of your browser, and click "
Xktvwcn"Ugtxgtu
" submenu. On the "
Xktvwcn"Ugtxgtu
"
page, click
Cff" Pgy”
. Then on the “
Cff" qt" Oqfkh{" c" Xktvwcn" Ugtxgt" Gpvt{
” page,
enter “11130” for the “Service Port” blank, and your IP address for the “IP Address” blank,
taking 192.168.1.198 for an example, remember to
Gpcdng
and
Ucxg
.
Figure A-4 Virtual Servers