RY/TP7231RY/TP723F "
522Odru"Yktgnguu"P"Tqwvgt"
- 34 -
Gpcdng" Yktgnguu" Tqwvgt" Tcfkq" /"
The wireless radio of this Router can be enabled or
disabled to allow wireless stations to access. The wireless radio can only be enabled or
disabled by using the WIFI ON/OFF switch on the device.
"
Gpcdng"UUKF"Dtqcfecuv"/"
When wireless clients survey the local area for wireless networks
to associate with, they will detect the SSID broadcast by the Router. If you select the
Gpcdng"
UUKF"Dtqcfecuv
checkbox, the Wireless Router will broadcast its name (SSID) on the air.
Gpcdng"YFU"Dtkfikpi"/
Check this box to enable WDS. With this function, the Router can
bridge two or more Wlans. If this checkbox is selected, you will have to set the following
parameters as shown in Figure 4-17. Make sure the following settings are correct.
Figure 4-17
UUKF*vq"dg"
- The SSID of the AP your Router is going to connect to as a client.
You can also use the search function to select the SSID to join.
DUUKF*vq"dg"
- The BSSID of the AP your Router is going to connect to as a
client. You can also use the search function to select the BSSID to join.
Uwtxg{
- Click this button, you can search the AP which runs in the current channel.
Mg{"v{rg
- This option should be chosen according to the AP's security configuration. It
is recommended that the security type is the same as your AP's security type
YGR" Kpfgz
- This option should be chosen if the key type is WEP(ASCII) or
WEP(HEX).It indicates the index of the WEP key.
Cwvj" V{rg
- This option should be chosen if the key type is WEP(ASCII) or
WEP(HEX).It indicates the authorization type of the Root AP.
Rcuuyqtf
- If the AP your Router is going to connect needs password, you need to fill
the password in this blank.
60804" Yktgnguu"Ugewtkv{"
Choose menu “
Yktgnguu"
→
" Yktgnguu"Ugewtkv{
”, you can configure the security settings of your
wireless network.
There are five wireless security modes supported by the Router: WEP (Wired Equivalent Privacy),
