RY/TP7231RY/TP723F "
522Odru"Yktgnguu"P"Tqwvgt"
- 47 -
Vtkiigt" Rtqvqeqn" /
The protocol used for Trigger Ports, either
VER
,
WFR
, or
Cnn"
(all
protocols supported by the Router).
Kpeqokpi"Rqtvu"/
The port or port range used by the remote system when it responds to the
outgoing request. A response using one of these ports will be forwarded to the PC that
triggered this rule. You can input at most 5 groups of ports (or port sections). Every group of
ports must be set apart with ",". For example, 2000-2038, 2050-2051, 2085, 3010-3030.
Kpeqokpi"Rtqvqeqn"/
The protocol used for Incoming Ports Range, either
VER
or
WFR
, or
CNN
(all protocols supported by the Router).
Uvcvwu"/
The status of this entry, either
Gpcdngf
or
Fkucdngf
.
Vq"cff"c"pgy"twng."hqnnqy"vjg"uvgru"dgnqy0" "
1. Click
the
"Cff"Pgy”"
button, the next screen will pop-up as shown in Figure 4-35.
2. Select a common application from the
Eqooqp" Crrnkecvkqpu
drop-down list, then the
Vtkiigt"Rqtv"
field and the
Kpeqokpi"Rqtvu
field will be automatically filled. If the
Eqooqp"
Crrnkecvkqpu"
do not have the application you need, enter the
Vtkiigt" Rqtv"
and the
Kpeqokpi"Rqtvu
manually.
3. Select the protocol used for Trigger Port from the
Vtkiigt" Rtqvqeqn
drop-down list, either
VER
,
WFR
, or
Cnn
.
4. Select the protocol used for Incoming Ports from the
Kpeqokpi" Rtqvqeqn
drop-down list,
either
VER
or
WFR
, or
Cnn0
5. Select
Gpcdng"
in
Uvcvwu
field.
6. Click
the
Ucxg
button to save the new rule.
Figure 4-35 Add or Modify a Port Triggering Entry
Vq"oqfkh{"qt"fgngvg"cp"gzkuvkpi"gpvt{<"
1. Click
the
Oqfkh{"
in the entry you want to modify. If you want to delete the entry, click the
"
Fgngvg
.
2. Modify the information.