RY/TP7231RY/TP723F "
522Odru"Yktgnguu"P"Tqwvgt"
- 68 -
603403"Uvcvke"Tqwvkpi"
Choose menu
›Cfxcpegf"Tqwvkpi"
→
" Uvcvke"Tqwvkpi
”, and you can configure the static route in
the next screen, shown in Figure 4-62. A static route is a pre-determined path that network
information must travel to reach a specific host or network.
Figure 4-62 Static Routing
Vq"cff"uvcvke"tqwvkpi"gpvtkgu."hqnnqy"vjg"uvgru"dgnqy0"
1. Click
Cff"Pgy”
shown in Figure 4-62, you will see the following screen Figure 4-63.
Figure 4-63 Add or Modify a Static Route Entry
2. Enter the following data.
Fguvkpcvkqp"Pgvyqtm
/
The
Fguvkpcvkqp"Pgvyqtm
is the address of the network or host
that you want to assign to a static route.
Uwdpgv" Ocum
/
The
Uwdpgv" Ocum
determines which portion of an IP Address is the
network portion, and which portion is the host portion.
Fghcwnv"Icvgyc{
/
This is the IP Address of the default gateway device that allows for the
contact between the Router and the network or host.
3. Select
Gpcdngf
or
Fkucdngf
for this entry on the
Uvcvwu
drop-down list.
4. Click
the
Ucxg
button to make the entry take effect.
Click the
Fgngvg
button to delete the entry.
Click the
Gpcdng"Cnn
button to enable all the entries.