RY/TP7231RY/TP723F "
522Odru"Yktgnguu"P"Tqwvgt"
- 52 -
section of the packets statistics. The result of the statistics is used for analysis by SYN Flood,
UDP Flood and ICMP-Flood.
FqU" Rtqvgevkqp" /
Denial of Service protection. Check the Enable or Disable button to
enable or disable the DoS protection function. Only when it is enabled, will the flood filters be
enabled.
"
Pqvg<"
Dos Protection will take effect only when the
Vtchhke"Uvcvkuvkeu"
in “
U{uvgo"Vqqn"
→
" Vtchhke"
Uvcvkuvkeu
” is enabled.
Gpcdng" KEOR/HNQQF" Cvvcem" Hknvgtkpi
/
Enable or Disable the ICMP-FLOOD Attack
Filtering.
KEOR/HNQQF" Rcemgvu" Vjtgujqnf" *7Å5822+
/
The default value is 50. Enter a value
between 5
Å
3600. When the current ICMP-FLOOD Packets number is beyond the set value,
the Router will startup the blocking function immediately.
Gpcdng"WFR/HNQQF"Hknvgtkpi
/
Enable or Disable the UDP-FLOOD Filtering.
WFR/HNQQF" Rcemgvu" Vjtgujqnf" *7Å5822+
/
The default value is 500. Enter a value
between 5
Å
3600. When the current UPD-FLOOD Packets number is beyond the set value,
the Router will startup the blocking function immediately.
Gpcdng" VER/U[P/HNQQF" Cvvcem" Hknvgtkpi
/
Enable or Disable the TCP-SYN-FLOOD
Attack Filtering.
VER/U[P/HNQQF" Rcemgvu" Vjtgujqnf" *7Å5822+
/
The default value is 50. Enter a value
between 5
Å
3600. When the current TCP-SYN-FLOOD Packets numbers is beyond the set
value, the Router will startup the blocking function immediately.
Kipqtg" Rkpi" Rcemgv" Htqo" YCP" Rqtv" vq" Tqwvgt
/
Enable or Disable Ignore Ping Packet
From WAN Port to Router. The default setting is disabled. If enabled, the ping packet from
the Internet cannot access the Router.
Hqtdkf"Rkpi"Rcemgv"Htqo"NCP"Rqtv"vq"Tqwvgt
/
Enable or Disable Forbid Ping Packet From
LAN Port to Router. The default setting is disabled. If enabled, the ping packet from LAN
cannot access the Router. This function can be used to defend against some viruses.
Click the
Ucxg
button to save the settings.
Click the
Dnqemgf"FqU"Jquv"Nkuv"
button to display the DoS host table by blocking.
60;05" Nqecn"Ocpcigogpv"
Choose menu “
Ugewtkv{"
→
" Nqecn"Ocpcigogpv
”, you can configure the management rule in the
screen as shown in Figure 4-41. The management feature allows you to deny computers in LAN
from accessing the Router.