RY/TP7231RY/TP723F "
522Odru"Yktgnguu"P"Tqwvgt"
- 33 -
Tgikqp
/
Select your region from the drop-down list. This field specifies the region where the
wireless function of the Router can be used. It may be illegal to use the wireless function of
the Router in a region other than one of those specified in this field. If your country or region
is not listed, please contact your local government agency for assistance.
When you select your local region from the drop-down list, click the
Ucxg"
button
.
then the
Note Dialog appears. Click
QM
.
Note Dialog
"
Pqvg<
Limited by local law regulations, version for North America does not have region selection
option.
Oqfg"/
Select the desired mode. The default setting is 11bgn mixed.
33d"qpn{"/"
Select if all of your wireless clients are 802.11b.
33i"qpn{"/"
Select if all of your wireless clients are 802.11g.
33p"qpn{/"
Select only if all of your wireless clients are 802.11n.
"
33di"okzgf"/"
Select if you are using both 802.11b and 802.11g wireless clients.
"
33dip"okzgf"/"
Select if you are using a mix of 802.11b, 11g, and 11n wireless clients.
Select the desired wireless mode. When 11g only mode is selected, only 802.11g wireless
stations can connect to the Router. When 11n only mode is selected, only 802.11n wireless
stations can connect to the AP. It is strongly recommended that you set the Mode to
33dip"
okzgf
, and all of 802.11b, 802.11g, and 802.11n wireless stations can connect to the
Router.
Ejcppgn" ykfvj" /"
Select the channel width from the drop-down list.
The default setting is
automatic, which can adjust the channel width for your clients automatically.
"
Pqvg<
" "
If
33d" qpn{
,
33i" qpn{
, or
33di" okzgf"
is selected in the
Oqfg"
field, the
Ejcppgn" Ykfvj"
selecting field will turn grey and the value will become 20M, which is unable to be changed.
Ejcppgn"/"
This field determines which operating frequency will be used. The default channel
is set to
Cwvq
, so the AP will choose the best channel automatically. It is not necessary to
change the wireless channel unless you notice interference problems with another nearby
access point.
Ocz"Vz"Tcvg"/"
You can limit the maximum tx rate of the Router through this field.