ProScan PS52682, Руководство пользователя

Страница: 14 / 88

The master remote that came packed with your
TV also controls most brands of VCR’s and cable-TV
boxes. The buttons shown below can be used to operate
your
TV. The rest of the buttons are used to control VCR’s,
players, audio equipment, or cable boxes and are
For added convenience, the simplified six-button remote
also lets you control most of the TV’s operations and
functions using the advanced menu system.
1 9
0
Button
turns on TV and puts remote in “TV Mode” so
that the other remote buttons will control the TV. Also
displays time (if clock has been set) and channel number on
the TV screen.
Important Note:
Most buttons on the master remote control will
not control the TV unless the remote is in the “TV Mode”. If
another component button (such
as
C A B L E
,
or
A U D I O
)
i s
Dressed. the remote will no longer be in the “TV Mode”.
To
back into the “TV Mode”, press the button labeled
remote will go back into the “TV Mode” and will control the TV
again.
0
CHANNEL Buttons
Press
CHANNEL
up to see the next higher channel in memory,
or press
CHANNEL
down to see the next lower channel in
memory.
Your TV will automatically program active channels for
your area into memory when you start the
feature
described
on
page
4 6 . You can also add or remove
individual channels from memory
as described on page
4 7 .
0
3
0
4
VOLUME Buttons
Press
VOLUME
up to increase volume, or press
VOLUME
down
to decrease volume. The volume display will automatically
appear on the screen when you press the
V O L U M E
buttons.
MUTE Button
Press
MUTE
to quickly reduce sound to its minimum level
without affecting the picture. This is very useful during
telephone calls or other interruptions. When sound is muted,
the word
Mute
will appear on the screen for a few seconds to
let you know you have muted the TV. To restore sound,
press
M U T E
again or press
V O L U M E
u p .
0
PC (Previous Channel) Button
Pressing the
P C
button causes the TV to change back to the
last-tuned channel. This is useful should you want to
monitor two channels.
To operate, select the first channel you want to watch. Then
select the other channel by pressing two number buttons.
The TV will now change back and forth between the two
channels each time you press the
P C
button.