PRONAR T740, Руководство пользователя

Страница: 86 / 136

4.16
•
Unhitch trans-shipment trailer drawbar eye from tractor hitch and drive tractor
away.
Wheel wedges shall be so placed that one of the is in front of the wheel and the second is
behind it.
Pneumatic system conduits must be placed in the sockets designed for this purpose
positioned on the drawbar bracket. Hydraulic system conduits should be secured with the aid
of attached clamps and suspend in sockets on the same bracket.
4.9 PROPER USE AND MAINTENANCE OF TYRES
•
When working on the tyres, wedges or other objects without sharp edges
should be placed under the wheels of the trans-shipment trailer to prevent it
from rolling. A wheel may be taken off the trailer axle only when the trailer is not
loaded.
•
Repair work on the wheels or tyres should be carried out by persons trained
and entitled to do so. This work should be carried out using appropriately
selected tools.
•
After removing a wheel, always check how firmly the nuts are screwed in.
Inspection should be carried out each time after first use, and then every 50 –
100 kilometres of travel.
•
Regularly check and maintain correct pressure in tyres according to instructions
(especially if trailer is not used for a longer period).
•
Pressure and tyres should be also checked after the whole day of intensive
work. Please note that higher temperatures could raise tyre pressure by as
much as 1 bar. At high temperatures and pressure reduced load or speed.
•
Do not release air from warm tyres to adjust the pressure or the tyres will be
underinflated when temperatures return to normal.
•
Protect valves using suitable caps to avoid soiling.
•
Do not exceed the trailer's maximum design speed.
•
Avoid potholes, sudden manoeuvres or high speeds when turning.