PRONAR T740, Руководство пользователя

Страница: 113 / 136

5.25
Thoroughly wash accumulated deposits off parabolic leaf springs and then after drying
grease internal surfaces of leaves with anticorrosion and greasing preparation.
When using the trans-shipment trailer, the user is obliged to observe greasing
instructions according to greasing schedule.
5.2.14 OPERATION NO. 14 - TECHNICAL INSPECTION OF WHEELS
Tyre pressure should be checked each time after changing spare wheel and not less than
every 3 months. In the event of intensive use it is recommended to check air pressure more
frequently. During this time the trans-shipment trailer must be unloaded. Checking should be
done before travelling when tyres are not heated, or after an extended period of parking.
While checking pressure pay attention to technical condition of wheels and tyres. Look
carefully at tyre sides and check the condition of tread. In case of mechanical damage
consult the nearest tyre service and check whether the tyre defect requires tyre replacement.
Wheels should be inspected with regard to distortion, breaking of material, breaking of welds,
corrosion, especially in the area of welds and contact with tyre.
Technical condition and appropriate maintenance significantly extends the life of these
elements and ensures appropriate level of safety to trailer users.
DANGER
Damaged tyres or wheels may be the cause of a serious accident.
Inspection of tyre pressure and steel rims:
•
every 3 months of use,
•
if needed.
5.2.15 OPERATION NO. 15 - REGULATION OF CLUTCH WORKING PRESSURE
In each case after changing tractor towing the trans-shipment trailer, regulate the hydraulic
clutch working pressure. Starting clutch without regulation may cause damage to it.