PRONAR T740, Руководство пользователя

Страница: 24 / 136

2.4
•
Do NOT change the settings of bolts placed on axle body limiting angle of axle
turning (turning block bolts are set in the factory). Change of bolt settings may
cause damage to braking system elements and damage to tyres.
•
Regularly check the condition of nut and bolt connections in particular
connections of drawbar eye with drawbar and wheel nuts.
•
Before welding or electrical work trans-shipment trailer should be disconnected
from the power supply. Conduit supplying lighting system and weigher should be
disconnected from tractor supply sockets. Load cell shall be dismantled (in the
event of electric welding), if not, it may be damaged. The paint coating should be
cleaned. Burning paint fumes are poisonous for people and animals. Welding
work should be carried out in a well lit and well ventilated space.
•
During welding work pay attention to flammable or fusible elements (parts of the
pneumatic, electric and hydraulic systems, plastic parts). If there is a risk that they
will catch fire or be damaged, they should be removed or covered with non-
flammable material before commencing welding work.
•
Should it be necessary to change individual parts, use only those parts indicated
by the manufacturer. Non-adherence to these requirements may cause danger to
the health and the user's and other people's lives, and also damage the hook
trailer.
•
After completing work connected with greasing, remove excess oil or grease.
•
Servicing and repair work should be carried out in line with the general principles
of workplace health and safety. In the event of injury, the wound must be
immediately cleaned and disinfected. In the event of more serious injuries, seek a
doctor's advice.
•
In the event of work requiring the trans-shipment trailer to be raised, use properly
certified hydraulic or mechanical lift jacks for this purpose. After lifting the trans-
shipment trailer, stable and durable supports must also be used. Work must not
be carried out under a machine which has only been raised with a lift jack.
•
The trans-shipment trailer must not be supported using fragile elements (bricks or
concrete blocks).