4.3
•
check if the hydraulic system operates correctly (with empty load box) by
activating the drive of the feeding mechanism and spreading adapter discs,
•
Ensure that hydraulic system does not have any leaks.
Engage the hydraulic drive for three minutes, and check the following:
•
that there is no knocking or noise in the drive system arising from scraping or
grinding of metal elements,
•
check if flow regulator operates correctly (if flow regulator setting is 0, conveyor
belt should stop; if flow regulator setting is increased, conveyor belt speed
should also increase),
•
correct rotation of adapter discs,
•
check if conveyor belt moves smoothly (belt seizure, falling of the belt off the
rollers and rubbing of belt connector against the feeding table walls are not
allowed).
ATTENTION!
The sand spreader must not be used for purposes other than those for which it is
intended.
Before using the sand spreader always check its technical condition. In particular, check
the technical condition of the hitch system, axle system, brake system, indicator lights,
spreading adapter, feeding mechanism and set of safety guards.
Rubbing of conveyor belt and adapter discs against sand spreader body, shaking of discs
and complete machine, changed noise and vibrations coming from loose nut and bolt
connections are not acceptable. Check conveyor belt connector when the belt is motionless
and the connector is located at the front, on the front driving roller. Deflect front rubber shield
and check condition of belt connector. The connector must not slide out of the belt stitch
elements.
The technical condition of the sand spreader's main brake can only be checked after
removing off. Make sure that the parking brake is released and the brake force regulator is in
NO LOAD serving.
If any faults are detected they must be identified and rectified. If a fault cannot be rectified or
the repair could void the guarantee, please contact retailer for additional clarifications.
Содержание T130
