PRONAR T130, Руководство оператора

Страница: 46 / 90

4.2
4.1 PREPARING FOR WORK BEFORE FIRST USE
The manufacturer guarantees that the sand spreader is fully operational and has been
checked according to quality control procedures and is ready for normal use. This does not
release the user from an obligation to check the machine's condition after delivery and before
first use. The machine is delivered to the user completely assembled.
Prior to connecting to the tractor, machine operator must verify the sand spreader's technical
condition, prepare it for first use and configure as needed. In order to do this:
•
the user must carefully read this Operator's Manual and observe all
recommendations, understand the design and the principle of machine
operation
•
check the condition of protective paint coat,
•
Inspect sand spreader's individual components for mechanical damage
resulting from incorrect transport (dents, piercing, bent or broken components),
•
Check all the sand spreader's lubrication points, lubricate the machine as
needed according to recommendations provided in section 5,
•
Check technical condition of tyres and tyre pressure,
•
check if the nuts and bolts fixing the wheels, drawbar, load box and other
components are properly tightened,
•
check if adapter discs and blades are correctly installed,
•
check tension of conveyor belt.
If all the above checks have been performed and there is no doubt as to the sand spreader's
good technical condition, it can be connected to tractor. Start the tractor's engine, check all
systems and perform a test run of the sand spreader without load (with empty load box). The
inspection should be conducted by two people, one of which should always remain in the
tractor cab. Inspection should involve the following actions:
•
check correct operation of lights and indicators by turning on individual lights of
the sand spreader,
•
When moving off check if the main brakes operate correctly,
•
check if the parking brake of sand spreader operates correctly,