PRONAR T130, Руководство оператора

Страница: 60 / 90

4.16
4.6 DRIVING ON PUBLIC ROADS
When driving on public roads, respect the road traffic regulations, exercise caution and
prudence. If the spreading is done on pavements special attention should be paid to the
bystanders likely to be near the working sand spreader. Listed below are the key guidelines
for driving the tractor and trailer combination.
•
Before moving off make sure that there are no bystanders, especially children, near the
sand spreader or the tractor. Take care that the driver has sufficient visibility.
•
Make sure that the sand spreader is correctly attached to the tractor and tractor's hitch is
properly secured.
•
The sand spreader must not be overloaded, loads must be uniformly distributed so that
the maximum permissible axle and drawbar loads are not exceeded. The sand spreader's
maximum carrying capacity must not be exceeded as this can damage the machine and
pose a risk to the operator or other road users.
•
Permissible design speed and maximum speed allowed by road traffic law must not be
exceeded. The towing speed should be adapted to the current road conditions, load
carried by the sand spreader, road surface conditions and other relevant conditions.
•
When not connected to the tractor, the sand spreader must be immobilised using parking
brake and possibly also with chocks or other objects without sharp edges placed under
the front and back wheels. Do NOT leave unsecured sand spreader. In the event of sand
spreader malfunction, pull over on the hard shoulder avoiding any risk to other road users
and position reflective warning triangle according to traffic regulations.
•
While driving on public roads the sand spreader must be fitted with a certified or
authorised reflective warning triangle. When driving, comply with all road traffic
regulations, indicate an intention to turn using indicator lamps, keep all road lights and
indicator lights clean at all times and ensure they are in good condition. Any damaged or
lost lamps or indicator lights must be immediately repaired or replaced.
•
The yellow beacon light should be turned on during sand spreader operation.
•
The conveyor belt and the spreading adapter drive should be engaged only during travel
of the tractor and sand spreader. When the sand spreader is stopped (e.g. at the traffic
lights), after emptying the load box or while reversing, the sand spreader's drive should
be disengaged.